當前位置：網站首頁 >> 代理品牌 >> 行業動態

代理品牌

行業動態

新聞詳情

LT86101SX-Lontium第四代HDMI/DVI中繼器

作者：網站管理員　來源：本站原創　日期：2022/2/24 14:41:21　點擊：397　屬于：行業動態

1. 一般的描述

LT86101SX是Lontium公司的第四代HDMI/DVI中繼器，基于cleararedge?技術，符合HDMI 1.3(高清晰度多媒體接口)規范。它是一個6.75Gbps (3 x 2.25Gbps)高性能重時鐘設備，支持3個TMDS數據通道和一個單一的時鐘通道。該設備還集成了一個雙向DDC有源緩沖區和一個并行CEC有源緩沖區，以提供一個完整的HDMI/DVI中繼器解決方案。

雙控制模式可用于LT86101SX。這為系統設計人員提供了非常靈活的解決方案，以考慮性能或成本。LT86101SX支持兩種控制模式:引腳控制模式和I2C控制模式。在引腳控制模式下，不需要外部MCU，基本功能由引腳配置控制，但高級功能是默認設置。在I2C控制模式下，需要外部MCU，芯片完全由MCU控制，控制引腳配置不再有效。

LT86101SX采用7mm x 7mm 48引腳QFN封裝，工作溫度范圍為0°C至+70°C。

2. 特性

?兼容HDMI 1.3，支持2.25Gbps的數據速率

?支持3D視頻格式和4Kx2K擴展分辨率格式

?自適應接收均衡高達40dB，以補償長/便宜的電纜損耗

?odt和校準，更好的信號完整性

?單獨的ODT電源交流耦合應用

?可配置傳輸去重，可達-9dB預補償信號失真

?集成反向終端，提高輸出信號質量

?容5v的有源DDC緩沖器允許電容高達3000pF

?并行有源CEC緩沖器，驅動能力高達3000pF

?擴展電纜長度如下:(rx面+ tx面)

高達(55m + 20m)超過26 AWG STP HDMI電纜@ 1.65Gbps

最大(35m + 20m)，超過26 AWG STP HDMI電纜@ 2.25Gbps

高達(25m + 15m)超過28awg STP HDMI電纜@ 1.65Gbps

高達(15m + 10m)超過28awg STP HDMI電纜@ 2.25Gbps

?可級聯，進一步延伸電纜

?雙控制模式靈活應用

?鏈路活動檢測，以啟用抑制選項

?0.75W典型功耗

?ESD額定值:HBM±6kV

?7mm x 7mm 48pin QFN無鉛封裝

3.應用程序

?TMDS電纜均衡器

?高清電視和顯示器

?DVI/HDMI電纜擴展模塊

?電纜組件

1. General Description

LT86101SX is Lontium’s 4th generation HDMI/DVI repeater based on ClearEdge? technology, compliant with the HDMI 1.3 (High Definition Multimedia Interface) specification. It is a 6.75Gbps (3 x 2.25Gbps) high performance re-clocking device that supports 3 TMDS data channels and a single clock channel. The device also integrates a bi-directional DDC active buffer and a parallel CEC active buffer to provide a complete HDMI/DVI repeater solution.
Dual control modes are available for LT86101SX. This provides system designers with very flexible solutions, for consideration of either performance or cost. The LT86101SX supports two control modes: Pin Control Mode and I2C Control Mode. In Pin Control Mode, no external MCU is needed, and the basic functions are under control of pin configurations, however advanced functions are at default settings. In I2C Control Mode, an external MCU is required, and the chip is fully controlled by MCU while the control pin configurations are not valid any more.
The LT86101SX is offered in a 7mm x 7mm 48-lead QFN package, and operates over a 0°C to +70°C temperature range.

2. FEATURES

? Compatible with HDMI 1.3, supports 2.25Gbps data rate
? Supports 3D video formats and 4Kx2K extended resolution formats
? Adaptive receive equalization up to 40dB to compensate for long/cheap cable losses
? ODTs and calibration for better signal integrity
? Separate ODT supply for AC-coupled applications
? Configurable transmit de-emphasis up to -9dB to pre-compensate signal distortion
? Integrated back-termination to improve output signal quality
? 5V-tolerant active DDC buffer allowing capacitance up to 3000pF
? Parallel active CEC buffer with drive capability up to 3000pF
? Extends cable length as follows: (RX-side + TX-side)
Up to (55m + 20m) over 26 AWG STP HDMI cable @ 1.65Gbps
Up to (35m + 20m) over 26 AWG STP HDMI cable @ 2.25Gbps
Up to (25m + 15m) over 28 AWG STP HDMI cable @ 1.65Gbps
Up to (15m + 10m) over 28 AWG STP HDMI cable @ 2.25Gbps
? Cascadable for further cable reach
? Dual control modes for flexible applications
? Link activity detection to enable squelch option
? Power dissipation of 0.75W typical
? ESD rating: HBM at ±6kV
? 7mm x 7mm 48-pin QFN lead-free package